Calculate depreciation per Schedule II of the Companies Act 2013 — Part C useful-life table, SLM and WDV methods, single / double / triple-shift adjustment, 5% residual cap. Pro-rated for mid-year additions.
| Year | Opening | Dep | Closing |
|---|---|---|---|
| 1 | ₹10,00,000 | ₹63,333 | ₹9,36,667 |
| 2 | ₹9,36,667 | ₹63,333 | ₹8,73,333 |
| 3 | ₹8,73,333 | ₹63,333 | ₹8,10,000 |
| 4 | ₹8,10,000 | ₹63,333 | ₹7,46,667 |
| 5 | ₹7,46,667 | ₹63,333 | ₹6,83,333 |
| 6 | ₹6,83,333 | ₹63,333 | ₹6,20,000 |
| 7 | ₹6,20,000 | ₹63,333 | ₹5,56,667 |
| 8 | ₹5,56,667 | ₹63,333 | ₹4,93,333 |
| 9 | ₹4,93,333 | ₹63,333 | ₹4,30,000 |
| 10 | ₹4,30,000 | ₹63,333 | ₹3,66,667 |
Schedule II of the Companies Act 2013 replaced the old rate-based system (Schedule XIV) with a useful-life approach. The auditor verifies depreciation by (a) checking the company has used Schedule II Part C useful lives or justified a different life, (b) checking residual is ≤ 5% of original cost unless justified, (c) checking shift adjustments (double-shift +50%, triple-shift +100%), and (d) checking pro-ration for mid-year additions.
This calculator uses the prescribed useful lives in Schedule II Part C. For Plant & Machinery, separate sub-categories apply (continuous process, special-rate, general). Departing from the prescribed life is permitted only with disclosure under Schedule II Note 4 — the auditor will want technical justification.
Schedule II to the Companies Act 2013 replaced the older Schedule XIV (which prescribed depreciation rates) with a useful-life-based depreciation regime, effective FY 2014-15. Companies depreciate fixed assets over the useful life prescribed in Part C of Schedule II, with adjustments for residual value (capped at 5% of original cost) and pro-ration for partial-year usage.
Two methods are permitted: Straight Line Method (SLM) — depreciation = (cost − residual) / useful life; or Written Down Value (WDV) method — depreciation rate computed from the useful life and residual value such that the residual equals 5% of cost at the end of useful life. The company chooses based on the pattern of consumption of economic benefits.
Schedule II provides specific useful lives for 11 broad asset classes (buildings, plant and machinery, furniture, vehicles, etc.) with sub-categories. The triple-shift / double-shift / single-shift adjustment under Part C(III) increases depreciation for assets used beyond single-shift basis — useful life is reduced by the prescribed factor for shift use.
A company buys plant and machinery worth ₹10 crore on 1 October 2025. Schedule II prescribes useful life of 15 years (general plant). The company uses SLM and runs double-shift operations.