How to set freelance accountant rates

A method for working out a freelance accounting rate from your own costs, hours and risk, plus the fee rules that limit how you may charge.

US rule; elsewhere, check your own regulator · Updated November 20, 2026

This page teaches a method. It does not give market rates, because a rate copied from someone else's situation tells you nothing about your costs, your skills or the work in front of you. What you will find here is how to build your own number, how to test it, and which rules limit the way you may charge.

Country-neutral: the arithmetic and the habits below apply anywhere. US rule: the contingent-fee limits described near the end apply to practitioners under US tax practice rules and to AICPA members in public practice. Check your own regulator for the fee and advertising rules of any other professional body you belong to.

What a rate has to cover

A rate is not what you would like to be paid. It is the price at which the work stays worth doing after everything it costs you. Start with a list, in your own currency, for one year:

  • What you need to take home after tax, which is a figure only you can set.
  • Taxes on your own practice. In the US that includes self-employment tax and estimated tax; see the taxes cluster for the method. Elsewhere, use your own tax authority's pages.
  • Costs of running the practice: software, equipment, internet, professional body fees, continuing education, licence renewals, insurance, bookkeeping for yourself.
  • Time you will not be paid for: holidays, illness, gaps between engagements, learning, admin, writing proposals, chasing invoices.

Add the first three, then divide by the hours you can realistically bill. The last item matters most, because it sets the divisor. New freelancers often divide by every working hour in the year and discover later that only a fraction of those hours were billable. The planner and calculator pages for this section let you try your own numbers; nothing you enter leaves your device.

The core formula

Required yearly revenue = take-home target + tax on the practice + running costs.

Required hourly rate = required yearly revenue divided by billable hours.

Illustrative example, labelled as such, using plain units instead of a currency. Suppose your required yearly revenue works out to 90,000 units. You expect 40 working weeks after holidays, gaps and learning, and 20 billable hours in each. That is 40 x 20 = 800 billable hours. The required rate is 90,000 / 800 = 112.5 units an hour. If you could only bill 15 hours a week, the same revenue needs 40 x 15 = 600 hours, and the rate becomes 90,000 / 600 = 150 units. Same costs, a third higher rate, purely because of utilisation. That is why this number should be rebuilt whenever your workload changes.

The figures above are not a recommendation. They show how the sensitivity runs.

Utilisation is the lever people forget

Utilisation is billable hours divided by total working hours. A practice with steady work from a few engagements can run high utilisation. A practice that spends days finding the next engagement runs low, and the rate must carry that cost. Track two things for a quarter: hours worked on each engagement, and hours spent on everything else. The second number is the honest overhead of your practice.

Two common errors follow from ignoring it:

  • Pricing on the hours a task takes in a perfect day, not the hours it takes including questions, rework and review notes.
  • Accepting a low fixed fee for work that has a long tail of follow-up.

Choose the pricing model before you quote

The same rate can be delivered three ways: by the hour, by a fixed fee for a defined scope, or per file or per unit of work. Each moves risk to a different side. The guide on hourly, fixed and per-file pricing walks through when each fits. In short:

  • Hourly moves the risk of overrun to the buyer and rewards careful records.
  • Fixed fee moves the risk of overrun to you and rewards accurate estimates.
  • Per file is a fixed fee with a standard unit; it works when files are alike and breaks when they are not.

Whatever the model, convert the offer back to an hourly equivalent using your own time records. If the equivalent falls below your required rate, either the scope, the price or the model needs to change.

Test any offer against your number

When someone offers a price, run four checks:

  • Estimate the hours using your own method, including review notes and communication. The estimating guide shows one.
  • Divide the price by those hours to get the equivalent rate.
  • Compare with your required rate from the formula above.
  • Look at what is not in the price: who pays for rework requested after you delivered, what happens if the file is larger than described, and how quickly you are paid.

A low equivalent rate is not automatically a reason to refuse. You may accept it for a reason you can state: a relationship, a gap in your calendar, a new type of work. The point is that you know the number, and that the decision is yours, not a default.

Rules that limit how you charge

Fee-setting freedom has edges. Two matter for accountants working on tax or assurance work.

US rule: contingent fees

Circular 230, section 10.27, is the US Treasury rule on fees for practitioners who practise before the IRS. In general it bars a contingent fee for services connected with a matter before the IRS, with a short list of exceptions: services in connection with an IRS examination of, or challenge to, an original return or an amended return or refund claim filed within 120 days of written notice of the examination or challenge; refund claims filed solely in connection with the determination of statutory interest or penalties the IRS assessed; and services in a judicial proceeding under the Internal Revenue Code. The section defines a contingent fee as one based wholly or partly on whether a position taken on a tax return or other filing avoids IRS challenge or is sustained, including fees set as a share of a refund or of tax savings or that otherwise depend on the specific result attained. It applies to fee arrangements entered into after 26 March 2008. Read the section itself; this summary leaves out detail.

The AICPA Code of Professional Conduct has its own contingent-fee rule at ET 1.510.001, and it binds AICPA members in public practice. The page on contingent fees explains how to avoid creating one by accident, for example when pay depends on the result of a review. Other rules may sit on top of these, including state board rules, so check the board that licenses you.

Pricing and professional standards

Price never changes what the professional standards require for an engagement. A fixed fee that is too low to do the work properly is a risk to the firm that signs and to you. If you cannot do the procedures an engagement needs within the price, say so before you accept, in writing.

Getting paid in a currency other than your own

If you invoice a US payer from outside the US, there are three questions to settle at quoting time: which currency the price is stated in, who bears conversion and transfer costs, and what tax paperwork the payer will ask for. For the last, the IRS Form W-8BEN is the usual certificate of foreign status that a non-US individual gives to a payer. The form instructions say it goes to the payer, not the IRS, and the rules for withholding reach amounts from US sources. Under 26 CFR 1.861-4, compensation for personal services is generally sourced by where the work is performed, so where you physically do the work affects how the payment is sourced; raise it with your own tax adviser before you quote. The cross-border pay guide covers the steps.

Keep a record that supports the price

A price is easier to defend, to you and to the buyer, when it rests on records. For each engagement keep the quote, the hours estimate behind it, your actual hours by task, and any scope changes with their dates. When a buyer asks why a file cost what it did, you can show the estimate, the change that moved it and the hours that followed. When a file runs over because the scope grew, the same record is your basis for a change request. Without it the conversation is one memory against another, and the person who wrote nothing down usually loses.

Review these records at the end of each engagement in a few minutes. Note the ratio of actual to estimated hours, and carry that ratio into the next quote of the same type.

Raising a price you set too low

If you discover your number was too low, change it for new work first. For existing relationships, give written notice, state the effective date, and apply it to new engagements. Do not renegotiate in the middle of a file; do it at the start of the next. Record the date and the reason so you can see over time which changes held.

A short worked routine

Once a year, and whenever your workload changes:

  • Rebuild the required revenue from your list of costs, tax and take-home target.
  • Replace your billable-hours guess with last year's records.
  • Compute the required rate.
  • Re-run your last five quotes against it and see how many cleared.
  • Note which model each quote used and whether the hours estimate held.

After two or three cycles you will have your own data: how far your estimates run from actuals, which work types overrun, which clients pay late. That data prices better than any benchmark.

Frequently asked questions

Should I publish my rates?

That is a choice about your practice, not a rule. If you publish, state what the rate covers and what it does not. Some professional bodies restrict how fees may be advertised; check your own regulator.

Can I charge the same rate for all work?

You can, but different work carries different risk and review burden. Many freelancers keep one base rate and adjust through scope and the choice of model, not through a separate rate for every task.

Is a fixed fee better than an hourly rate?

Neither is better on its face. A fixed fee suits work you can scope and have done before. An hourly rate suits work with unknowns. The deciding question is who should carry the risk of overrun, and whether you can estimate well enough to carry it.

Do I add tax on top of my rate?

Your rate has to cover your own tax cost. Whether any sales or value-added tax applies to your invoices depends on where you operate; check your own tax authority.

What if the buyer sets the price?

Then the exercise is the same, in reverse: estimate hours, compute the equivalent rate, compare it with your number, and decide with the facts.

Where the official text is

The Circular 230 fee section is on the eCFR. The AICPA Code is published by the AICPA; the contingent-fee rule is ET 1.510.001 in the full-text copy linked below. The IRS instructions for Form W-8BEN explain who gives the form and what it certifies.

Sources

Last verified November 20, 2026. Sources checked by the editorial team; not yet reviewed by a named professional. General information, not legal, tax or accounting advice.

Related pages

Terms used on this page

Self-employment tax, Contingent fee, Estimated tax, Form W-8BEN

Join the CORAA CPA network waitlist

CORAA prepares audit files for US CPA firms. Network members are independent contractors who clear what the software flags, with evidence and a note, paid per file under a contractor agreement.

  • Files are offered to you; you accept or decline
  • No exclusivity: you can work for others
  • The firm reviews and signs; CORAA never does

* required